Check Receive Signal; Check Transmit Signal - Hughes Direcway DW6000 User Manual

High-speed internet modem

Hide thumbs Also See for Direcway DW6000:

Table of Contents

Check receive signal

The DW6000 will not function if satellite signals are not received properly.

1. At the Control Center, click on the

Info screen appears. See Figure 18.

2. In the

Receive Status

If the Rx Code is

The receiver is operational (RxCode 5)

DW6000 is receiving signals properly. Proceed to the next troubleshooting

step.

If any other Rx Code appears, the DW6000 is not receiving signals properly.

Click on the Rx Code. Follow the troubleshooting procedure that appears.

Figure 18: Reception info

The DW6000 will not function if satellite signals are not transmitted properly.

1. At the Control Center, click on the

Transmission Info screen appears. See Figure 19.

2. In the

Transmit Status

If the Tx Code is

Transmitter available for Normal Operation

the DW6000 is transmitting signals properly. Proceed to the

(TxCode 8)

next troubleshooting step.

If any other Tx Code appears, the DW6000 is not transmitting signals

properly. Click on the Tx Code. Follow the troubleshooting procedure that

appears.

Figure 19: Transmission info

Reception Info

row, check the Rx Code.

Transmission Info

row, check the Tx Code.

DW6000 Troubleshooting

indicator. The Reception

the

indicator. The

Table of Contents