Calibrate Laminator Tab - HID FARGO HDP5000 User Manual

Page 4-3
Field
Set Language
4.3

Calibrate Laminator Tab

The Calibrate Laminator tab is active when the laminator is automatically detected or when
the laminator is manually checked as a feature on the Configuration tab.
The Calibrate Laminator option sends the calibrate laminator command to printer. Follow
the instructions on the page for calibration of the lamination sensor.
The lamination module must be warm before sending the calibrate option. If not an error will
occur and will trigger the module to start warm-up. Retry the calibration again after several
minutes
Calibration may also be performed from the printer LCD.
February 2016
Description
If additional languages are available, the user can select the language the printer
will display on the LCD.
Selections are:
• Arabic
• Chinese
• English
• French
• German
ToolBox
• Indonesian
• Italian
• Japanese
• Portuguese
• Spanish
L000950, Version: 4.0