Subscribe to Our Youtube Channel
Related Manuals for HID FARGO DTC II
Summary of Contents for HID FARGO DTC II
- Page 1 HID® FARGO® DTC™ii and DTCii Plus Recommended Maintenance HID® FARGO® DTC™ii and DTCii Plus Recommended Maintenance PLT-06335, A.0 February 2022...
-
Page 2: What's New
HID GLOBAL, HID, the HID Brick logo, the Chain Design, FARGO, and DTC are trademarks or registered trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. - Page 3 Powering HID® FARGO® DTC™ii and DTCii Plus Trusted Identities Recommended Maintenance HID® FARGO® DTC™ii and DTCii Plus Recommended Maintenance Introduction 1.1 Daily maintenance 1.2 Preventive maintenance Cleaning routines 2.1 Adhesive cleaning card routine 2.2 IPA cleaning card routine 2.3 Print head cleaning routine PLT-06335, A.0...
- Page 4 Section 01 Introduction...
-
Page 5: Daily Maintenance
Powering HID® FARGO® DTC™ii and DTCii Plus Trusted Identities Recommended Maintenance 1.1 Daily maintenance Perform these steps daily: Remove and discard any rejected cards. Clean the card transport path as needed. Once every 250 cards at minimum depending on environment, card quality,... - Page 6 Section 02 Cleaning routines...
- Page 7 Powering HID® FARGO® DTC™ii and DTCii Plus Trusted Identities Recommended Maintenance 2.1 Adhesive cleaning card routine Video link: https://player.vimeo.com/video/679193087 The following diagram shows the location where the cleaning card is inserted into the printer. 1. Remove all cards from the card hopper.
- Page 8 Powering HID® FARGO® DTC™ii and DTCii Plus Trusted Identities Recommended Maintenance 2.2 IPA cleaning card routine Video link: https://player.vimeo.com/video/679193300 The following diagram shows the location where the IPA cleaning card is inserted into the printer. 1. Remove the ribbon cartridge from printer, set it aside, and leave front door open.
- Page 9 Powering HID® FARGO® DTC™ii and DTCii Plus Trusted Identities Recommended Maintenance 2.3 Print head cleaning routine Video link: https://player.vimeo.com/video/679193550 The following diagram shows the location of the print head. 1. With the printer on, open the front door and remove the ribbon cartridge and set it aside.
-
Page 10: Revision History
Powering HID® FARGO® DTC™ii and DTCii Plus Trusted Identities Recommended Maintenance Revision history Date Description Revision February 2022 Initial release. PLT-06335, A.0 February 2022... - Page 11 For technical support, please visit: https://support.hidglobal.com © 2022 HID Global Corporation/ASSA ABLOY AB. All rights reserved. PLT-06335, Rev. A.0 Part of ASSA ABLOY Dummy text.
Need help?
Do you have a question about the FARGO DTC II and is the answer not in the manual?
Questions and answers