When the Supplies option is selected, the following takes place:
Ribbon Type and Film Type drop-down menus are inactivated and populated with values of
installed supplies. Dual Sided and Options are set to defaults for detected supplies.
If no printer is found or no ribbon is installed, the option is enabled.
Note: The previously selected ribbon and film values will remain. An error message will display.
When the Supplies option is not selected or it is cleared from a selected state, the ribbon and film
drop-down menu become active and auto selected ribbon and film types remain until manually
changed.
3.3
Image Color Tab
Use the Image Color tab to control the sharpness, contrast, and gamma of the printed image, as well
as the individual color balance of yellow, magenta and cyan.
L000950, Version: 4.0
Printer Driver Operations
Page 3-10
February 2016