8.1
Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using Workbench
1.
Verify that the latest version of Workbench is installed.
2. To access Workbench
bring up the
3. Select the printer from the drop-down list.
4. Select Secure Imaging in the Printer Utilities group. Note the message pertaining to the use of
the correct ribbon (Must have a fluorescent panel).
L000950, Version: 4.0
Fluorescent Panel Usage
click on
Diagnostics
FARGO Workbench Printer Utility
on the Card tab of the printing preferences to
.
Page 8-2
February 2016