3.6
Lamination Tab
Note: When no laminator is detected, the Lamination tab is active but all functions are disabled.
The card lamination module will accept either of the following:
•
Thermal Transfer Film: The thermal transfer film overlaminate is a relatively thin material which
covers a card edge-to-edge and provides a medium level of card durability and security.
•
PolyGuard Overlaminate: PolyGuard is a much thicker material which does not cover edge-to-
edge, but provides an extremely high level of card durability and security.
Note: PolyGuard is available in either a 1.0 or 0.6 mil thickness and should always be used for
those applications requiring the highest degree of card durability and security. Available in clear
or holographic patch.
Group or Field
Lamination Position
L000950, Version: 4.0
Printer Driver Operations
Description
Use this option to adjust the horizontal position of the laminate.
To adjust the position, click on the horizontal adjustment arrows.
• To move the overlaminate toward the printer output side, enter a positive number.
• To move the overlaminate toward the printer input side of the printer, enter a
negative number.
Maximum value for the horizontal adjustments is 100 Pixels (10 Pixels = 0.03 [0.8mm]).
Page 3-20
February 2016