HID FARGO HDP5000 User Manual page 15

Page 1-9
Component
Print Area
Print Colors
Print Method
Print Modes
Print Resolution
Print Ribbon Options
Print Speed in Normal
Mode
Print Speed in
Performance Print Mode
February 2016
Description
Over-the-edge on CR-80 cards.
Up to 16.7 million and 56 shades per pixel
HDP Dye-Sublimation/ Resin Thermal Transfer
Print Head options:
Note: Both Normal and Performance are 300 DPI in both the short and long
dimensions of the card
• Normal print mode (default)
• Performance print mode is faster with lower image quality and is most
suitable for minimal color with mostly resin text.
HDP5600/600 DPI print head only:
• Normal mode is 600 DPI in the short dimension, but effectively 300 DPI in
the long dimension (default)
• Premium mode is a full 600 DPI in both the short and the long dimensions
of the card.
300 dpi (11.8 dots per mm) continuous tone
600 dpi (HDP5600 only)
Prints or Images:
• YMC, 750 prints
• YMCK* 500 prints
• YMCKK* 500 prints
• YMCKH* 500 prints
• YMCFK, 500 prints
• YMCKI, 500 prints
• YMCIKH, 375 prints
• YMCKIKI, 375 prints
• YMCK Half panel, 1000 prints
• YMCKK Half Panel, 750 prints
• Premium Black Resin (K) 3000 prints
*Indicates the Ribbon type and the number of Ribbon panels printed where
Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, H=Heat Seal, I=Inhibit, and
F=Fluorescing
• YMC - 29 seconds per card/ 124 cards per hour
• YMCK - 35 seconds per card/ 103 cards per hour
• YMCKK - 49 seconds per card/ 73 cards per hour
• YMCK+Lam - 40 seconds per card/ 90 cards per hour
• YMCKK+Lam - 55 seconds per card/ 65 cards per hour
Note: Performance is most suitable for minimal color and mostly resin text.
• YMC - 24 seconds per card/ 150 cards per hour
• YMCK - 29 seconds per card/ 124 cards per hour
• YMCKK - 40 seconds per card/ 90 cards per hour
• YMCK+Lam - 34 seconds per card/ 106 cards per hour
• YMCKK+Lam - 48 seconds per card/ 75 cards per hour
Specifications
L000950, Version: 4.0