Table of Contents
Advertisement
Page 4-3
4.2
Calibrate Laminator Tab
The Calibrate Laminator tab is active when the laminator is automatically detected or when the
laminator is manually checked as a feature on the Configuration tab.
Note: The lamination module must be warm before calibrating. Calibration may also be performed
from the printer LCD.
To Calibrate the Laminator:
1.
Ensure that the laminate materials are installed in all stations to be calibrated.
2. Ensure the Laminator lid is closed.
3. Click CalibrateLAM1 or Calibrate LAM2.
The Printer LCD will display CALIBRATE PASSED.
4. Click the OK button on the LCD display to complete the procedure.
May 2017
ToolBox
PLT-02496, Version: 1.2
Advertisement
Table of Contents
Troubleshooting
