Configuring Fluorescent Data (F-Panel For Ymcfk Ribbon) Using The Application; Creating Fluorescent Text - HID FARGO HDP5000 User Manual

Page 8-9
8.2

Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Application

This process creates a fluorescent image on the card using a simple text string command in the badge
application.
8.2.1

Creating Fluorescent Text

1. Create a new text box in the badge application.
2. Type the text that should appear as fluorescent and put a ~T before the start of the text, with
no space after the ~T. The text will start on the card where the ~T begins.
3. Create the image (actual size) that should fluoresce in a separate drawing program and save it
as a "Grayscale" or "1-bit" bmp file
4. Create a new text box in the badge application, and type ~I followed by the address of the
image. When implemented on the card, the top left of the image will start at the top left of the
text box.
February 2016
Fluorescent Panel Usage
.
L000950, Version: 4.0