Setting Procedure - Toshiba e-STUDIO520 Service Handbook

8.1.3

Setting procedure

(1) Start up the self-diagnosis setting mode 08-765, and then change the setting value to "0".
(2) Turn the power OFF, and then ON.
(3) Press the [USER FUNCTIONS] button to enter the user function screen.
(4) Press the [ADMIN] button.
• When the Administrator Password has been set, ADMINISTRATOR PASSWORD screen is
displayed.
(5) Press the [PASSWORD] button and the screen is switched to a full keyboard. Then key in the
Administrator Password and press the [ENTER] button.
* Confirm the password to the administrator.
(6) Press the [SERVICE] button in the ADMIN screen.
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Fig. 8-1
Fig. 8-2
e-STUDIO520/523/600/603/720/723/850/853
8 - 5
8
REMOTE SERVICE