Ground Pto And Live Pto - wsm M7060 Workshop Manual

M6060, M7060, WSM

[13] GROUND PTO AND LIVE PTO

Top Cover Assembly and PTO Gear Case Assembly
1. Remove the 3-point hitch hydraulic block mounting screws and
nuts.
2. Remove the 3-point hitch hydraulic block assembly (1).
3. Remove the PTO gear case (2) and PTO drive shaft as a unit.
(When reassembling)
• Apply liquid gaskets (Three Bond 1206C or equivalent) to joint
face of the 3-point hitch hydraulic block (1) and PTO gear case
(2).
3-point hitch hydraulic
block mounting screw
3-point hitch hydraulic
Tightening torque
block mounting nut
PTO gear case mounting
screw and nut
(1) 3-Point Hitch Hydraulic Block
Ground PTO Lever and Arm
1. Remove the roll pin (1) and ground PTO lever (2).
2. Remove the retainer plate (3).
3. Pull the arm (4) to disconnect the ground PTO shift fork (6).
(When reassembling)
• Be sure to assemble the O-ring (5) properly.
• Be sure to assemble the arm (4) to the ground PTO shift fork (6).
(1) Roll Pin
(2) Ground PTO Lever
(3) Retainer Plate
2-S55
TRANSMISSION
166.7 to 196.1 N·m
17.0 to 20.0 kgf·m
123.0 to 144.0 lbf·ft
123.6 to 147.1 N·m
12.61 to 15.00 kgf·m
91.17 to 108.4 lbf·ft
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 lbf·ft
(2) PTO Gear Case Assembly
9Y1210828TRS0086US0
(4) Arm
(5) O-ring
(6) Ground PTO Shift Fork
9Y1210828TRS0087US0
KiSC issued 08, 2013 A