Front Cover - wsm M7060 Workshop Manual

M6060, M7060, WSM

(8) Front Cover

Front Cover
1. Remove the front cover (1).
(When reassembling)
• Make sure that the front cover gasket (4) set in position.
• Make sure that the liquid gasket coating surface is free of water,
dust and oil in order to keep sealing effect.
NOTE
• Assemble the adhesive-applied parts within ten minutes.
• Apply a liquid gasket (Three Bond 1217H or equivalent) (5)
to the seam between crankcase 1 (3) and crankcase 2 (2).
Front cover mounting
Tightening torque
screw
(1) Front Cover
(2) Crankcase 2
(3) Crankcase 1
Relief Valve
1. Remove the relief valve retaining screw (5).
2. Remove the relief valve (2), the spring (3) and the packing (4).
Tightening torque Relief valve retaining screw
(1) Front Cover
(2) Relief Valve
(3) Spring
1-S45
ENGINE
30 to 34 N·m
3.0 to 3.5 kgf·m
22 to 25 lbf·ft
(4) Front Cover Gasket
(5) Liquid Gasket
9Y1210828ENS0064US0
69 to 78 N·m
7.0 to 8.0 kgf·m
51 to 57 lbf·ft
(4) Packing
(5) Relief Valve Retaining Screw
9Y1210828ENS0065US0
KiSC issued 08, 2013 A