wsm M7060 Workshop Manual page 406

M6060, M7060, WSM
Front Bracket and Rear Bracket Bushing
1. Visually inspect the DX bushings for signs of wear or damage.
(The DX bushing tends to show concentrated wear.)
2. If the DX bushing is worn beyond the alloy portion "L", replace
it.
Front bracket and rear
Alloy thickness "L"
bracket bushing
Rear differential case
Factory specification
boss O.D.
Front differential case
Factory specification
boss O.D.
Bearing Retainer and Front Wheel Case Support Bushing
1. Visually inspect the DX bushings for signs of wear or damage.
(The DX bushing tends to show concentrated wear.)
2. If the DX bushing is worn beyond the alloy portion "L", replace
it.
Front wheel case support
Alloy thickness "L"
bushing
Bearing retainer O.D. Factory specification
5-S19
FRONT AXLE
0.57 mm
0.022 in.
109.965 to 110.000 mm
4.32933 to 4.33070 in.
79.965 to 80.000 mm
3.1483 to 3.1496 in.
9Y1210828FAS0031US0
0.57 mm
0.022 in.
59.97 to 60.00 mm
2.361 to 2.362 in.
9Y1210828FAS0032US0
KiSC issued 08, 2013 A