Lever Combination Switch And Horn Switch (Cabin Model) - wsm M7060 Workshop Manual

M6060, M7060, WSM

(2) Lever Combination Switch and Horn Switch (CABIN Model)

Checking Connector Voltage
1. Disconnect the lever combination switch connector (1).
2. Measure the voltage with voltmeter across the connector
terminal B1 and chassis, across the terminal B2 and chassis.
3. If the voltage differs from the battery voltage, the wiring harness,
fuses or main switch is faulty.
Main switch at
"OFF"
Voltage
Main switch at
"ON"
(1) Lever Combination Switch
Checking Light Switch and Turn Signal Switch
1. Test the continuity through the switch with an ohmmeter.
2. If the continuity specified below is not indicated, the switch is
faulty.
(1) Lever Combination Switch
Connector (Switch Side)
8-S47
ELECTRICAL SYSTEM
Terminal B1 –
Chassis
Approx. battery
voltage
Terminal B2 –
Chassis
(2) Combination Switch Connector
(Wire Harness Side)
9Y1210828ELS0086US0
(a) Right Turn
(b) OFF
(c) Left Turn
(d) OFF
(e) Head Light (Lo)
(f) Head Light (Hi)
9Y1210828ELS0087US0
KiSC issued 08, 2013 A