wsm M7060 Workshop Manual page 189

M6060, M7060, WSM
Step, Floor Mats and Wiring Harness for Cabin Side
1. Remove the auxiliary step on both sides.
2. Remove the fuel filling port (2).
3. Remove the floor mat 1 (3) and mat 2 (4).
4. Remove the floor cover (5), the duct band (7) and the front duct
(8).
5. Disconnect the connectors (6).
6. Pull out these connectors from cabin.
(1) Auxiliary Step
(2) Fuel Filling Port
(3) Floor Mat 1
(4) Floor Mat 2
1-S28
ENGINE
(5) Floor Cover
(6) Connector
(7) Duct Band
(8) Front Duct
9Y1210828ENS0035US0
KiSC issued 08, 2013 A