Throttle Sensor - wsm M7060 Workshop Manual

M6060, M7060, WSM

[6] THROTTLE SENSOR

Throttle Sensor Input Voltage
1. Remove the hand throttle lever grip and the throttle sensor
connector (3).
2. Turn the main key switch ON.
3. Check the voltage between terminal A (+) and terminal B (−) of
the wire harness side.
Voltage Terminal A –Terminal B
(1) Hand Throttle Lever
(2) Throttle Sensor
(3) Throttle Sensor Connector
8-S20
ELECTRICAL SYSTEM
5 V
[A] ROPS Model
[B] CABIN Model
[C] Connector (Harness)
A: Terminal A
B: Terminal B
9Y1210828ELS0035US0
KiSC issued 08, 2013 A