Front Work Light Switch (Rops Model) - wsm M7060 Workshop Manual

M6060, M7060, WSM

(5) Front Work Light Switch (ROPS Model)

Checking Connector Voltage
1. Turn the main switch to ON position.
2. Measure the voltage with a voltmeter across the terminal a and
chassis.
3. If the voltage differ from the battery voltage, the wiring harness
or fuse is faulty.
Voltage Terminal a – Chassis
(1) Front Work Light Switch
Checking Front Work Light Switch Continuity
1. Measure the resistance with ohmmeter across the terminal a
and terminal c, and across the terminal d and terminal e.
2. If the measurement is not following below, the switch or the bulb
are faulty.
Resistance
Terminal a – Terminal c
(Switch at OFF)
Resistance
Terminal a – Terminal c
(Switch at ON)
Resistance
Terminal d – Terminal e
(Bulb)
(1) Front Work Light Switch
8-S50
ELECTRICAL SYSTEM
Approx. battery voltage
(2) 6P Connector (Wire Harness Side)
9Y1210828ELS0092US0
Infinity
0 Ω
Approx. 13 Ω
(2) Bulb
9Y1210828ELS0093US0
KiSC issued 08, 2013 A