wsm M7060 Workshop Manual page 628

M6060, M7060, WSM
Inner Cover (R.H.)
1. Remove the hand accelerator lever grip (1).
2. Remove the range gear shift lever grip (2).
3. Remove the auxiliary control lever grip (3).
4. Remove the position control lever grip (4) and draft control lever
grip (5).
5. Pull out the switch board (6).
6. Disconnect the 5P connector (15) from front wiper switch (7).
7. Disconnect the 5P connector from rear wiper switch (if
equipped).
8. Disconnect the 3P connector (white) (16) from front working
light switch (8).
9. Disconnect the 3P connector (blue) (17) from rear working light
switch (9).
10. Disconnect the 3P connector (white) from 4WD switch (F12/R12
transmission model) (10).
11. Remove the inner cover R.H. (20).
12. Disconnect the 3P connector (21) from PTO switch (12).
13. Disconnect the 2P connector (22) from cigar lighter (13).
14. Disconnect the 3P connector (23) from auxiliary socket (14).
(1) Hand Accelerator Lever Grip
(2) Range Gear Shift Lever Grip
(3) Auxiliary Control Lever Grip
(4) Position Control Lever Grip
(5) Draft Control Lever Grip
(6) Switch Board
(7) Front Wiper Switch
(8) Front Working Switch
(9) Rear Working Switch (If equiped)
(10) 4WD Switch (If equiped)
(11) Beacon Light Switch (If equiped)
(12) PTO Switch
(13) Cigar Lighter
9-S46
(14) Auxiliary Socket
(15) 5P Connector (Front Wiper Switch)
(16) 3P Connector
(Front Working Light Switch)
(17) 3P Connector
(Rear Working Light Switch)
(18) 3P Connector (4WD Switch)
(19) 3P Connector
(Beacon Light Switch)
(20) Inner Cover (R.H.)
(21) 3P Connector (PTO Switch)
(22) 2P Connector (Cigar Lighter)
(23) 3P Connector (Auxiliary Socket)
9Y1210828CAS0079US0
KiSC issued 08, 2013 A
CABIN