Servicing; Brake Pedal - wsm M7060 Workshop Manual

M6060, M7060, WSM

[3] SERVICING

(1) Brake Pedal

Parking Gear
1. Remove the external circlip and draw out the parking cam shaft.
2. Remove the parking gear (4) and remove the parking gear pin
and the parking gear.
(1) Circlip
(2) Roll Pin
(3) Parking Gear Spring
(4) Parking Gear
Brake Pedal Bushing
1. Measure the brake pedal bushing I.D. with inside micrometer.
2. Measure the pedal shaft O.D. with outside micrometer and
calculate the clearance.
3. If the clearance exceeds the allowable limit, replace it.
Factory specification
Clearance between
brake pedal bushing and
pedal shaft
Allowable limit
Brake pedal bushing I.D. Factory specification
Pedal shaft O.D. Factory specification
4-S18
BRAKES
(5) Parking Gear Pin
(6) Circlip
(7) Parking Cam Shaft
(8) Parking Cam Spring
9Y1210828BRS0028US0
0.0300 to 0.246 mm
0.00119 to 0.00968 in.
0.5 mm
0.02 in.
25.030 to 25.146 mm
0.98544 to 0.99000 in.
24.9 to 25.0 mm
0.981 to 0.984 in.
9Y1210828BRS0029US0
KiSC issued 08, 2013 A