wsm M7060 Workshop Manual page 569

M6060, M7060, WSM
Armature Coil
1. Check the continuity across the commutator and armature coil
core with an ohmmeter.
2. If it conducts, replace the armature.
3. Check the continuity across the segments of the commutator
with an ohmmeter.
4. If it does not conduct, replace the armature.
Commutator –
Armature coil core
Resistance
Commutator segment
Overrunning Clutch
1. Inspect the pinion for wear or damage.
2. If there is any problem, replace the overrunning clutch
assembly.
3. Check that the pinion turns freely and smoothly in the
overrunning direction and does not slip in the cranking direction.
4. If the pinion slips or does not rotate in the both directions,
replace the overrunning clutch assembly.
Brush Holder
1. Check the continuity across the brush holder and the holder
support with an ohmmeter.
2. If it conducts, replace the brush holder.
Brush holder –
Resistance
Holder support
8-S60
ELECTRICAL SYSTEM
Infinity
0 Ω
9Y1210828ELS0111US0
9Y1210828ELS0112US0
Infinity
9Y1210828ELS0113US0
KiSC issued 08, 2013 A