Cooling System - wsm M7060 Workshop Manual

M6060, M7060, WSM

(3) Cooling System

Fan/Air-conditioner Belt Tension
1. Measure the deflection (L) at measurement point (a),
depressing the belt halfway between the pulleys at specified
force 98 N (10 kgf, 22 lbf).
2. If the measurement is not within the factory specifications,
loosen the tension pulley nut (1) and lock nut (3). Using the
tension adjusting screw (2), relocate the tension pulley to adjust.
NOTE
• Turn counterclockwise the tension adjusting screw (2) to
increase the belt tension.
Factory
Deflection (L) specifica-
tion
(1) Tension Pulley Nut
(2) Tension Adjusting Screw
(3) Lock Nut
Alternator Belt Tension
1. Measure the deflection (L), depressing the belt halfway
between the pulleys at specified force 98 N (10 kgf, 22 lbf).
2. If the measurement is not within the factory specifications,
loosen the alternator mounting screws (1) and relocate the
alternator to adjust.
Deflection (L) Factory specification
(1) Alternator Mounting Screw
1-S14
ENGINE
ROPS 16 to 17 mm
Model 0.63 to 0.66 in.
CABIN 11 to 12 mm
Model 0.44 to 0.47 in.
[A] ROPS Model
[B] CABIN Model
L : Deflection
a : Measurement Point
9Y1210828ENS0007US0
10 to 12 mm
0.394 to 0.472 in.
L : Deflection
9Y1210828ENS0008US0
KiSC issued 08, 2013 A