wsm M7060 Workshop Manual page 347

M6060, M7060, WSM
Assembling Procedure for Rear Axle
1. Assemble the ball bearing (2) to the rear axle case.
2. Assemble the oil seal 1 (1), face the seal lip to outside.
3. Assemble the oil seal 2 (3) to the rear axle.
4. Assemble the rear axle to rear axle cae.
5. Assemble the external circlip (5) then tap in the ball bearing (4)
to the rear axle shaft.
(When reassembling)
• Apply transmission fluid to the oil seal when insert the rear axle
to rear axle case.
(1) Oil Seal 1
(2) Ball Bearing
(3) Oil Seal 2
3-S12
REAR AXLE
(4) Ball Bearing
(5) External Circlip
9Y1210828RAS0020US0
KiSC issued 08, 2013 A