Checking Error Code - wsm M7060 Workshop Manual

M6060, M7060, WSM

(5) Checking Error Code

Preparation
1. While pressing both the PTO/Hour meter select switch (1) and
traveling speed select switch (2), turn the key switch to ON
position.
2. Release and press both the PTO/Hour meter select switch (1)
and traveling speed select switch (2).
(1) PTO/Hour Meter Select Switch
Checking Mode 1 (Check the Error History)
IMPORTANT
• This error code history is displayed only tractor ECU
information. You cannot check the DTC code in this mode.
1. Set the mode item "CHK-1".
2. Make sure that the mode item "TST-1" blinks on the display
with press and hold the traveling speed select switch until
"E-XXX" or "NO ERROR" appears on the display.
NOTE
• Every time pressing the PTO/Hour meter select switch or
traveling speed select switch, the item changes in order of
diagnostic trouble code history. If there is no diagnostic
trouble code history, "NO ERROR" shows on the display.
1. Press the "PTO/Hour meter select switch" Item No. count up.
2. Press the "traveling speed select switch" Item No. count down.
3. Turn the main switch "OFF".
(1) Error Number
Checking Mode 2 (Erase Error History)
1. Set the mode item "CHK-2".
2. Make sure that the mode item "CHK-2" blinks on the display
with press and hold the traveling speed select switch until
"CLEAR" appears on the display.
3. Make sure that the mode item "CLEAR" blinks on the display
with press and hold the traveling speed select switch until
"CLEAR" appears on the display.
4. After making sure "OK", turn the main switch "OFF".
NOTE
• ERROR-41/42 is indicated in this checking error code
mode. Basically these error codes is not indicated on the
meter panel.
ERROR-41: Communication trouble between the engine
ECU and the Main ECU.
ERROR-42: Communication trouble between the Meter
ECU and the Main ECU.
A : ERROR MEMORY
B : ERROR CODE No.
8-S27
ELECTRICAL SYSTEM
9Y1210828ELS0044US0
(2) Traveling Speed Select Switch
9Y1210828ELS0045US0
(2) Error Code
9Y1210828ELS0046US0
(a) Overwrite sequential
(b) Sequential input
9Y1210828ELS0047US0
KiSC issued 08, 2013 A