Disassembling And Assembling; Hydraulic Shuttle Valve And Solenoid Valve Assembly; Removing Fuel Tank (Rops Model); Removing Fuel Tank (Cabin Model) - wsm M7060 Workshop Manual

M6060, M7060, WSM

5. DISASSEMBLING AND ASSEMBLING

[1] HYDRAULIC SHUTTLE VALVE AND SOLENOID VALVE
ASSEMBLY

(1) Removing Fuel Tank (ROPS Model)

(2) Removing Fuel Tank (CABIN Model)

Draining Transmission Fluid and Fuel
1. See page 3-S4.
Rear Wheel (L.H.) and Fender (L.H.)
1. Place the disassembling stand under the transmission case.
2. Remove the rear wheel (2).
3. Place the disassembling stand under the rear axle case.
4. Remove the fender (1).
(When reassembling)
Tightening torque Rear wheel mounting nut
(1) Fender
Fuel Tank
1. Disconnect the wire harness from fuel level sensor (1).
2. Remove the fuel filling port screw.
3. Remove the fuel hose and overflow hose.
4. Remove the fuel tank (2).
(1) Fuel Level Sensor
Draining Transmission Fluid and Fuel
1. See page 3-S4.
Fuel Filling Port and Auxiliary Step
1. Remove the fuel filling port mounting screw (1).
2. Remove the auxiliary step (2).
(1) Fuel Filling Port Mounting Screw
Fuel Tank Under Cover
1. Remove the fuel tank mounting screws (1) and under cover
mounting screws (2).
(1) Fuel Tank Mounting Screw
2-S22
TRANSMISSION
9Y1210828TRS0017US0
260 to 304 N·m
26.5 to 31.0 kgf·m
191.8 to 224.2 lbf·ft
(2) Rear Wheel
9Y1210828TRS0018US0
(2) Fuel Tank
9Y1210828TRS0019US0
9Y1210828TRS0017US0
(2) Auxiliary Step
9Y1210828TRS0021US0
(2) Under Cover Mounting Screw
9Y1210828TRS0022US0
KiSC issued 08, 2013 A