Adjusting Accelerator Lever And Wire - wsm M7060 Workshop Manual

M6060, M7060, WSM

(2) Adjusting Accelerator Lever and Wire

Adjusting Accelerator Lever (ROPS Model)
1. When shifting the hand accelerator lever (1) to low engine
speed and the accelerator pedal (4) is neutral position, adjust
the turnbuckle (2) with accelerator rod (3) to hold the engine
speed to minimum.
2. Touch the accelerator pedal (4) to bolt (5) and adjust the length
of bolt (5) to hold the engine speed to maximum.
Length of accelerator rod
Reference value
"L1"
Length of bolt "L2" Reference value
(1) Hand Accelerator Lever
(2) Turnbuckle
(3) Accelerator Rod
2-S20
TRANSMISSION
310 mm
12.2 in.
30 mm
1.2 in.
(4) Accelerator Pedal
(5) Bolt
9Y1210828TRS0015US0
KiSC issued 08, 2013 A