Tightening Torques - wsm M7060 Workshop Manual

M6060, M7060, WSM

3. TIGHTENING TORQUES

Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : Refer to "5. TIGHTENING TORQUES" on page G-15)
[4WD]
Tie-rod end lock nut
Front axle rocking force adjusting screw
Front axle rocking force adjusting lock nut
Power steering hose retaining nut
Front wheel mounting nut (M16)
Bracket mounting nut
Bracket mounting screw
Tie-rod end slotted nut
Tie-rod joint lock nut
Knuckle arm mounting screw (M12)
Bevel gear case mounting screw (M16, 9T)
Front wheel case support mounting screw (M16, 9T)
Front wheel case cover mounting screw
Front wheel mounting stud bolt (M16)
Differential case cover mounting screw (M8, 9T)
Item N·m
167 to 196
20 to 29
98.1 to 147
23 to 27
260 to 304
124 to 147
167 to 196
157 to 176
167 to 196
78 to 90
260 to 304
260 to 304
48 to 55
131 to 152
30 to 34
5-S4
FRONT AXLE
kgf·m lbf·ft
17.0 to 20.0 123 to 144
2.0 to 3.0 15 to 21
10.0 to 15.0 72.4 to 108
2.3 to 2.8 17 to 20
26.5 to 31.0 192 to 224
12.6 to 15.0 91.2 to 108
17.0 to 20.0 123 to 144
16.0 to 18.0 116 to 130
17.0 to 20.0 123 to 144
7.9 to 9.2 58 to 66
26.5 to 31.0 192 to 224
26.5 to 31.0 192 to 224
4.9 to 5.7 36 to 41
13.3 to 15.5 96.2 to 112
3.0 to 3.5 22 to 25
9Y1210828FAS0003US0
KiSC issued 08, 2013 A