Separating Transmission Case - wsm M7060 Workshop Manual

M6060, M7060, WSM

(3) Separating Transmission Case

[5] SEPARATING TRANSMISSION CASE
Separating Clutch Housing Case from Transmission Case
1. Make sure the clutch housing case and transmission case are
securely mounted on the disassembling stands.
2. Remove the transmission case mounting screws and nuts.
3. Separate the transmission case from the clutch housing.
(When reassembling)
• Apply liquid gasket (Three Bond 1206C or equivalent) to joint
face of transmission case and clutch housing case.
Transmission case and
clutch housing mounting
screw, nut (M10, 9T)
Tightening torque
Transmission case and
clutch housing mounting
screw, nut (M14, 9T)
Removing 3-point Hitch Hydraulic Block
1. Disconnect the both cylinder hose (2) and return hose (4).
2. Remove the hydraulic cylinder (1).
3. Remove the 3-point hitch hydraulic block mounting screws and
nut.
4. Remove the 3-point hitch hydraulic block (3).
(When reassembling)
• Apply liquid gaskets (Three Bond 1206C or equivalent) to joint
face.
Cylinder hose retaining nut
3-point hitch hydraulic
Tightening torque
block mounting screw
3-point hitch hydraulic
block mounting nut
(1) Hydraulic Cylinder
(2) Cylinder Hose
Removing Rear Axle Case
• See page 3-S7.
PTO Gear Case
1. Remove the PTO cover (1).
2. Remove the PTO gear case assembly (2).
(When reassembling)
• Apply liquid gaskets (Three Bond 1206C or equivalent) to joint
face.
PTO gear case mounting
Tightening torque
screw
(1) PTO Cover
2-S32
TRANSMISSION
60.8 to 70.5 N·m
6.2 to 7.2 kgf·m
44.9 to 52.1 lbf·ft
166.7 to 196.1 N·m
17.0 to 20.0 kgf·m
123.0 to 144.6 lbf·ft
9Y1210828TRS0044US0
34.3 to 48.1 N·m
3.5 to 4.9 kgf·m
25.3 to 35.4 lbf·ft
166.7 to 196.1 N·m
17.0 to 20.0 kgf·m
123.0 to 144.3 lbf·ft
123.6 to 147.1 N·m
12.61 to 15.00 kgf·m
91.17 to 108.4 lbf·ft
(3) 3-point Hitch Cylinder Block
(4) Return Hose
9Y1210828TRS0045US0
9Y1210828TRS0046US0
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 lbf·ft
(2) PTO Gear Case
9Y1210828TRS0047US0
KiSC issued 08, 2013 A