Uploading Format Header Information - Avery Dennison Monarch 9419 Reference Manual

Spacing
Type
Baseline
Cell Width
Cell Height
Nominal Width
Nominal Height
Inter-Character Gap
Printhead Density
U p l o a d i n g F o r m a t H e a d e r I n f o r m a t i o n
Upload format header information from the formats in memory to check the supply length and
width for each format. Formats stored in flash memory are loaded into RAM when the printer
boots. However, the formats remain in flash memory when the printer is turned off.
Syntax
{header,format#,action,device | }
F1. header
F2. format#
F3. action
F4. device
Example
{F,0,H,Z | }
Selects all formats in memory and returns the following:
Example
{F,0,H,Z |
Fmt_1,406,406 |
Fmt_10,324,406 |
Fmt_15,812,812 |
Fmt_20,305,609 | }
Displays the format number, supply length and supply width (in dots) for each format in memory.
Example
{F,1,H,Z | }
Selects format1 and returns the following to the host:
{F,1,H,Z |
Fmt_1,406,406 | }
Displays the supply length and supply width (in dots) for format1.
2-16 Packet Reference Manual
Monospaced (0) or proportional (1).
Bitmapped (0) or scalable (1).
Bottom of the font.
Horizontal number of dots to contain the widest character.
Vertical number of dots to contain the tallest character.
Average width for lower-case letters.
Average height for lower-case letters.
Default spacing between characters in monospaced fonts.
Displays whether a 203 (0) dpi or 300 (1) dpi printhead is used. The
scalable font (font 50) does not display which printhead (203 dpi or
300 dpi) is used.
Format Header
Format number from 0 to 999. 0 is for all formats in memory.
Action. Options:
A Adds the specified format
C Clears the specified format
H Uploads format header information
Device. Options:
F Flash
M Memory card (optional)
R Volatile RAM
Z All devices (use for upload)