R e p l a c i n g t h e B a t t e r y
To change the battery:
1. Hold the printer upright with one hand and
press the battery release button on the handle
with your other hand.
2. The battery compartment door opens slightly.
Use your finger to open the door.
3. Remove the battery.
4. Insert a new battery (label side up) into the
compartment (connector end last).
5. Close the compartment door until it clicks into place.
B a t t e r y S a f e t y I n f o r m a t i o n
See Appendix A,
"Specifications &
recommended operating/storage temperatures for the battery.
Charge the battery before using it. For optimal battery life, charge the battery within three
♦
months of receipt.
Warning:
Do not substitute batteries. Charge the battery using one of the Monarch®
chargers listed in Appendix A,
The battery might explode if placed on a different charger.
The printer uses battery power even when it is not printing. Turn off the printer when it is
♦
not in use. Take the battery out of the printer when storing the printer for a month or longer.
The battery should be charged before long-term storage or after the battery has been
exhausted from a printing session. Frequent charging actually prolongs battery life and has
no negative effects such as memory loss.
Accessories" for the replacement battery part number and
"Specifications &
Classification: Avery Dennison – Public
Batter y Connec tor End
Accessories."
Getting Started 1-3