Technical Data - Husqvarna DUAL PURPOSE TE 610 I.E Owner's Manual

TECHNICAL DATA

ENGINE
Type.............................. 4-stroke single cylinder
Cooling....................... by liquid, with twin-radiator
and electric fan
Bore......................................................... 3.85 in.
Stroke .......................................................... 3 in.
Capacity............................................ 35.2 cu. in.
Compression ratio....................................... 11:1
Starting.................................................... electric
VALVE GEAR
Type ....................... single overhead camshaft,
chain driven; 4 valves
Valves clearance (with cold engine):
Inlet ....................................................... 0,002 in.
Exhaust ................................................ 0,002 in.
LUBRICATION
Type....................... forced with lobe-twin-pump
IGNITION
Type .................................. Electronic, inductive
discharge, with adjustable advance
(digital control)
Spark plugs type .......................... "NGK" CPR8E
Plug gap .................................... 0.022÷0.026 in.
FUEL SYSTEM
Type................. indirect electronic injection feed
6
2-ENG 8000 B0836.indd 6 2-ENG 8000 B0836.indd 6
PRIMARY DRIVE
Drive pinion gear......................................... z 32
Clutch ring gear ......................................... z 75
Ratio.......................................................... 2,343
CLUTCH
Type ........................ oil bath multiple-disc
clutch
TRANSMISSION
Type .................................. constant mesh gear
Ratios:
1st ............................................ 2,615 (Z 34/13)
2nd............................................ 1,812 (Z 29/16)
3rd............................................. 1,350 (Z 27/20)
4th ............................................ 1,091 (Z 24/22)
5th ............................................ 0,916 (Z 22/24)
6th ............................................ 0,769 (Z 20/26)
SECONDARY DRIVE
Transmission sprocket ............................... z 15
Rear wheel sprocket ................................. z 45
Ratio ......................................................... 3,000
Chain .................................................. 5/8"x1/4"
FINAL RATIOS
1st gear................................................... 18,389
2nd gear ................................................. 12,744
3rd gear ................................................... 9,492
4th gear..................................................... 7,670
5th gear .................................................... 6,445
6th gear..................................................... 5,409
FRAME
Type ..... single-beam frame with round section
steel barts; rear frame made of light alloy square
section tubes.
FRONT SUSPENSION
Type ....."Upside-Down" telescopic hydraulic
front fork with advanced axle (adjustable in
compression and rebound stroke); stanchions
tubes 1.77 in. dia.
Legs axis stroke ..................... 11.8 in. (TE 610)
9.8 in. (SM 610)
REAR SUSPENSION
Type .progressive with hydraulic single shock
absorber (spring preloading and hydraulic
brake adjustments both in compression and
in extension stroke)
Wheel stroke .......................... 12.6 in. (TE 610)
11.4 in. (SM 610)
FRONT BRAKE
Type ............ (SM 610) fl oating disc 12.6 in. dia.
with hydraulic control and fi xed caliper
Type ................. (TE 610) fi xed disc 10.2 in. dia.
with hydraulic control and fl oating caliper
REAR BRAKE
Type ..................... fl oating disc 8.7 in. dia. with
hydraulic control; fl oating caliper
26-09-2007 10:04:59 26-09-2007 10:04:59