Husqvarna DUAL PURPOSE TE 610 I.E Owner's Manual page 66

RECOMMENDED MAINTENANCE
PROCEDURES
You will fi nd the approved MAINTENANCE
procedures on the coupons. These
procedures have been worked out by
Husqvarna service personnel. It will be the
owners responsibility to take care of these
periodic services. Bring the coupon booklet
along when you visit your dealer at the
specifi ed mileages to have your motorcycle
inspected and serviced. Have your dealer
sign the service coupon stubs for required
proof of service during the warranty period.
All service Coupons, including the one at
1,000 Km, are to be paid, both for materials
and labour. - You will be repaid with long,
trouble-free service and will protect your
investment in a quality Husqvarna product.
4
2-ENG 8000 B0836.indd 4 2-ENG 8000 B0836.indd 4
IDENTIFICATION DATA (Fig. 1)
The motorcycle is identifi ed by:
- serial number (1) of the motorcycle
stamped on the steering tube right side;
- serial number (2) of the engine stamped on
the upper part of the left half crankcase;
- the colour code is stamped on the plate (3)
located on the left of the rear frame. (Turn
the rear fi xing pin anticlockwise to
remove the saddle for gaining access to
the plate).
FIG. 1
1. Motorcycle serial number
2. Engine serial number
3. Color code decal
When ordering for spare parts, do not forget
to state the motorcycle serial number and
the color code.
Write this code on your owner's manual so
as to remember it should the adhesive plate
come off.
COLOUR CODE.....................
26-09-2007 10:04:58 26-09-2007 10:04:58