Husqvarna DUAL PURPOSE TE 610 I.E Owner's Manual page 72

- remove, in the LOWER side, the hose "IN"
(4) then turn it toward the outside;
- remove the other hose "OUT" (5, fastened
on the RED union);
- remove the fuel tank front fastening screw
(6);
- remove the screws (7) and, on the R.H.
side, the breather hose (8);
- lift the fuel tank then detach the fuel
pump connector (9) from the main wiring
harness.
To reassemble, reverse the above
operations.
10
2-ENG 8000 B0836.indd 10 2-ENG 8000 B0836.indd 10
FIG. 4
5. Fuel hose (OUT)
6. Fuel tank fastening screw
7. Fuel tank fastening screw
8. Breather hose
9. Fuel pump connector
26-09-2007 10:05:02 26-09-2007 10:05:02