Husqvarna DUAL PURPOSE TE 610 I.E Owner's Manual page 76

4-rpm
(instant speed and engine r.p.m.). From
the setting 3-CLK, by pressing the MODE
knob (B), the setting 4-rpm comes on. The
setting 4-rpm is available after the knob is
released.
It shows:
- Instant speed in big digits (max 199 km/h
o Mph);
- Engine r.p.m. in small digits.
- Engine r.p.m. in vertical and horizontal
LED indicators.
If the engine "redlines", the warning light
(C) comes on.
14
2-ENG 8000 B0836.indd 14 2-ENG 8000 B0836.indd 14
Warning lights
1- GREEN warning light "Lights";
2- GREEN warning light "Neutral" (ALSO
see page 15);
3- "BATTERY CHARGE" warning light (the
warning light comes on when the engine is
stopped and the ignition key is on IGNITION
position or when the battery voltage is not in
the planned limits);
4- "1st ENGINE OIL REPLACEMENT"
warning light (the warning light comes on
after 1000 Km/620mi. approx.; it is necessary
to carry out the Service Coupon A);
5- "MAINTENANCE" warning light (the
warning light comes on after 5000 Km/
3100mi. approx.; it is necessary to
carry out the Service Coupon B);
6- "MAX ENGINE r.p.m." warning light
(the warning light comes on after that the
vertical and horizontal "LED" indicators
have completed their stroke: 8250 r.p.m.
approx.);
7- GREEN warning light "Blinkers";
8- BLUE warning light "High beam";
9- AMBRE warning light "Fuel reserve" (3,6l;
3.17 Imp. Qt.; 3.8 U.S. Qt.);
10- VERTICAL and HORIZONTAL "LED"
indicators
10 a: Vertical "LED" indicator "BATTERY
CHARGE" (the indicator is on when the
ignition key is on IGNITION position and the
engine is stopped;when the engine starts,
the indicator stops the battery check and
starts the tachometer running)
10 a+10 b: Vertical and horizontal "LED"
indicators "TACHOMETER" (both indicators
are on when engine starts: the end of the
indicators stroke shows 8250 r.p.m.).
26-09-2007 10:05:05 26-09-2007 10:05:05