Husqvarna DUAL PURPOSE TE 610 I.E Owner's Manual page 116

HELMET LOCK (Fig. 43)
The helmet lock is located on the motorcycle
right side, over the passenger footrest.
NOTE
Never drive with the helmet fastened to the
baggage grid.
FIG. 43
1. Helmet lock
54
2-ENG 8000 B0836.indd 54 2-ENG 8000 B0836.indd 54
PROLONGED INACTIVITY
When the motorcycle is to be stored for any
length of time, is should be prepared for
storage as follows:
- Clean the entire motorcycle thoroughly.
-Empty the fuel tank.
WARNING
Never litter the environment with fuel.
- remove the spark plug and introduce a few
drops of oil in the cylinder, then rotate the
engine by hand to distribute a protective oil
fi lm on inner walls;
- rest the engine on a wooden stand to make
the wheels clear of the ground. Defl ate the
tires;
- remove the battery and store it well
charged in a dry place. Battery check and
charge should be performed after the vehicle
has been idle for more than one month;
- protect the motorcycle with a canvas.
MOTORCYCLE CARE
Clean your motorcycle periodically, bearing
in mind the following:
- clean the engine using petrol and dry with
clean cloth;
- wash varnished parts of frame with water
and sponge, then dry with chamois cloth;
- with the exclusion of the engine, never use
solvents, petrol, alcohol or petrol to avoid
damaging the paintwork;
- rub chromium plated components with
vaseline and clean with chamois cloth;
- b e c a r e f u l n o t t o w e t e l e c t r i c a l
26-09-2007 10:05:28 26-09-2007 10:05:28