Husqvarna DUAL PURPOSE TE 610 I.E Owner's Manual page 81

4) shift gear pedal (4) in neutral position;
5) press the engine start-stop switch (5) then
the start button (6).
2-ENG 8000 B0836.indd 19 2-ENG 8000 B0836.indd 19
Put the start lever (2) in its initial position as
soon as the engine is idling. When starting
with an already warmed up engine DO NOT
USE the starter. When a cold engine has just
been started, do not increase revs, to ensure
an adequate oil warm-up and circulation.
NOTE
A safety switch (A) is set on the clutch lever
support. This switch allows you ONLY to
start the engine with idle gearbox, or with the
gear engaged and the clutch lever pulled.
IMPORTANT
After starting the engine, wait approx. for 2
minutes before you start out during the hot
season and approx. for 5 minutes during the
cold season.
NEVER START WITH DISCONNECTED
BATTERY.
19
26-09-2007 10:05:07 26-09-2007 10:05:07