Husqvarna DUAL PURPOSE TE 610 I.E Owner's Manual page 90

IDLE ADJUSTMENT (Fig. 19)
Adjust the idle with warm engine and with
the throttle control in closed position.
Proceed as follows:
- Turn slow running adjusting screw (1) on
the right side of the bike, behind the air
fi lter box, until the idle condition of 1,600
r.p.m. is reached (turn the screw clockwise
to increase the rpm, and anticlockwise to
descrease the rpm).
FIG. 19
1. Idle adjusting screw
28
2-ENG 8000 B0836.indd 28 2-ENG 8000 B0836.indd 28
FUEL FILTERS (Fig. 20)
There are three fuel fi lters: the fi rst fi lter is
located inside the fuel pump (1) and doesn't
need maintenance, the other two fi lters are
located inside the fuel tank, on the cocks (2)
and (3). Clean those two fi lters as described
in the "periodical maintenance card".
FIG. 20
1. Fuel pump
2. R.H. fuel cock
3. L.H. fuel cock
26-09-2007 10:05:11 26-09-2007 10:05:11