Husqvarna DUAL PURPOSE TE 610 I.E Owner's Manual page 95

BRAKING SYSTEM
The braking system is divided into two
completely indipendent circuits. Each circuit
is provided with a caliper connected to a
hydraulic control pump with tank for the
fl uid (incorporated on the pump for the rear
brake and separated for the rear one). Both
calipers, work on steel discs fastened to the
wheel hub.
2-ENG 8000 B0836.indd 33 2-ENG 8000 B0836.indd 33
ADJUSTAMENT OF FRONT
BTAKE CONTROL LEVER (fi g. 25).
On the SM model the lever position can
be adjusted (4 adjustments) for any driver
hand size. To decrease the lever distance
from the handle grip, turn the adjuster (B)
CLOCKWISE. To increase the lever distance
from the handle grip, turn the adjuster (B)
COUNTERCLOCKWISE.
On the TE model the adjuster (2), located
on the control lever, allows adjusting of the
free play (a). Free play (a) must be at least
3 mm (0.1 in.).
Fig. 25
B. Adjuster
2. Adjuster
A: To decrease clearance
B: To increase clearance
33
26-09-2007 10:05:14 26-09-2007 10:05:14