Vehicle care and maintenance
Rear combination lights
1. Remove the screws (A) that hold the light unit and remove
the light unit.
7
7-64
2. Turn the socket and bulb assembly counterclockwise to
remove it.
N00943700458
B- Rear side-marker light, and tail and stop light (LED)
- cannot be replaced
C- Rear turn signal light
NOTE
The rear side-marker light, and the tail and stop light uses
an LED instead of the bulb.
Check with an authorized Mitsubishi Motors dealer or a
repair facility of your choice when the light needs to be
repaired or replaced.