Stabilizer Support - Polaris 1999 Sportsman 400 Service Manual

REAR SUS PENS ION
379
Wash er
IL-_ B _ U ZX-
/1 C
' j
®
Inspection
t
A
\1
B
Bushing
Washer
I. Inspect the linkage rod (A, Figu re 62) for wear
or damagc.
2. Inspect the arm bracket (Figu re 63 ) for cracks or
other damage.
3. Check the rubber bushings (B,
Fi ~ ure
62 ) for
deterioration. Replace all four bushings as a set
even
if
one or two are damaged.
STAB ILIZER SU PPO RT
Remov a1 /1nstul lation
Re fer 10 F ig u r c
40.
I. Remove the rear fender as described in Chapter
Fifteen.
2. Remove the rear whee
l on
the side to be serviced
as described in this chapter.
3. Remove both shock absorbers as described in
this chapter.
4. Place a suitable size jack under the rear of the
transmission to support it afterthe stabilizersupport
is removed.