STEERING / SUSPENSION
FRONT STABILIZER BAR
REPLACEMENT (50" & XC)
q
1. Remove the nut
retaining the front stabilizer bar
w
link
to the upper control arm
2. Remove the Fasteners retaining the stabilizer bar
mount to the frame.
3. Remove the stabilizer bar out the side of the vehicle.
4. Remove the fasteners
link to the stabilizer bar.
5. To install, reverse procedure and torque fasteners to
specification
TORQUE
Stabilizer Bar Link Fasteners:
40 ft-lb (54 Nm)
Stabilizer Bar Mount Fasteners:
17 ft-lb (23 Nm)
9.20
e
on both sides.
r
retaining the stabilizer bar
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.