Polaris 1999 Sportsman 400 Service Manual page 298

292
9. Carefully slide the whccl hub and brake rotor off
the front axle (Figur e 5).
10. Remove the outer bearing (F igure 6) from the
whee l hub.
11. Remove the inner bearing (F igure 7) from the
front axle.
12. Remove the lIillard clutch assembly (f igure
8) .
NOTE
Do
110/
mix parts
ofone Hillard clutch
assembly wi th similar parts from an -
other clutch
ussernbty.
13. Remove the spacer (Fig ure 9).
®
14. Note the location of the armature plate (Figure
10), then remove
it.
T he
plate must
be rei nstalled in
the same posit ion during assembly.
15. Inspect the front hub componenls as described
in the following procedure,
Inspection
Refer to f igure II.
CHAPTER TEN