Polaris 1999 Sportsman 400 Service Manual page 268

262
26. Install the bearing
onto the high/low/reverse
shaft as follows:
3.
Heat the bearing on a hot plate to aid in instal-
lation.
b. Install the bearing onto the shaft . Tap on the
inner race of the hearing and install the bear-
ing until
it
bottoms on the wash er or circlip
(Figure 61).
27. Apply ThreeUond No. 1342, or equivalent.
threadlocking compound to the screw threads prior
to installation. Install the oil deflect or (Fig ure 62).
Do not overtighten the screws, as the mountin g ho le
surrounding area may crack.
NO TE
lf a neu ' drive elw in is being installed,
it
(' (/ 11
he installed running in either
direction.
NOTE
Looking directly
at
the drive cha in
and gears. the dri ve chain travels
counterclockwise
U l1
the two ge
ars
(F igure 63) .
CHAPTER NINE