Polaris 1999 Sportsman 400 Service Manual page 275

T RAI\:SM ISS IO~
®
,
A
269
®
c. Slide on the was her and insta ll the new
circlip. Make sure the circlip is correctly
seated in the shaft groove.
d. Slide on the high/reverse engagement dog
(e).
c. Slide on the washer and the need le bearing.
f. Position the high gear with the gear dogs side
going on first and slide the gear ( B) onto the
shaft and onto the need le bearing.
g.
Slide on the washer and install the new
eire lip. Make sure the circlip is cor rectly
sea ted in the shaft groove.
h. Il eat the hear ing on a ho t plate to a id in instal-
lat ion .
1.
Install the bearing (A) onto the shaft. Tap on
the inner race of the bearing and install the
bearing until it bottoms on the shri ft shoulder
(F igu re 95) .
3. To assemble the silent chain and input shaft onto
the high/low/reverse shaft , perform the following:
a. lnstal l the silent chain onto the gea r sproc ket
o n the inpu t shall (Figure 90).