2.7.44 [1-1] Slot—DPH Port Command (KX-TDA30 only)
Commands for the DPH ports can be programmed.
INS
Puts the port in service.
Value Range
Not applicable.
Maintenance Console Location
2.7.44 [1-1] Slot—DPH Port Command (KX-TDA30 only)
Programming Manual References
2.7.43 [1-1] Slot—DPH Card Property (KX-TDA30 only)
Feature Guide References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Value Range
Not applicable.
Maintenance Console Location
2.7.44 [1-1] Slot—DPH Port Command (KX-TDA30 only)
Programming Manual References
2.7.43 [1-1] Slot—DPH Card Property (KX-TDA30 only)
Feature Guide References
None
2.7 [1] Configuration
PC Programming Manual
333