Panasonic KX-TDA100 Programming Manual page 316

2.7 [1] Configuration
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
This cell is only active when Status on this screen shows Registered.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
2.7.38 [1-1] Slot—IP-Extension Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Status
Indicates whether a certain IP-PT is registered (reference only).
Value Range
None, Registered
Maintenance Console Location
2.7.38 [1-1] Slot—IP-Extension Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
IP Address
Indicates the IP address of the IP-PT (reference only).
316 PC Programming Manual