2.7 [1] Configuration
2.7.26 [1-1] Slot—E1 Port—Channel Command
Commands for the E1 channels can be programmed.
INS
Puts the channel in service.
Value Range
Not applicable.
Maintenance Console Location
2.7.26 [1-1] Slot—E1 Port—Channel Command
Programming Manual References
2.7.25 [1-1] Slot—E1 Port
Feature Guide References
None
OUS
Takes the channel out of service. This enables a temporary non-use of the channel, for example, for
the purpose of repair.
Value Range
Not applicable.
Maintenance Console Location
2.7.26 [1-1] Slot—E1 Port—Channel Command
Programming Manual References
2.7.25 [1-1] Slot—E1 Port
Feature Guide References
None
272
PC Programming Manual