Panasonic KX-TDA100 Programming Manual page 287

Feature Guide References
1.5.4.7 Pause Insertion
1.5.4.8 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
1.5.4.9 Special Carrier Access Code
Flash Time
Specifies the length of a flash signal.
Value Range
None, 16 × n (n=1–255) ms
Maintenance Console Location
2.7.28 [1-1] Slot—E&M Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
1.11.7 External Feature Access (EFA)
Disconnect Time
Specifies the length of time after a trunk is disconnected, during which the PBX cannot seize the line.
Value Range
0.5 s, 1.5 s, 2.0 s, 4.0 s, 12.0 s
Maintenance Console Location
2.7.28 [1-1] Slot—E&M Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
1.11.6 Flash/Recall/Terminate
2.7 [1] Configuration
PC Programming Manual 287