2.7 [1] Configuration
Default
10 s
Value Range
10 × n (n=1–255) s
Maintenance Console Location
2.7.10 [1-1] Slot—DPH Card Property
Programming Manual References
None
Feature Manual References
1.5.9 External Sensor
2.7.11 [1-1] Slot—DPH Port Command
Commands for the DPH ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.11 [1-1] Slot—DPH Port Command
Programming Manual References
2.7.10 [1-1] Slot—DPH Card Property
Feature Manual References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Default
Not applicable.
92
PC Programming Manual