Panasonic KX-TDA100 Programming Manual page 33

2. Tool Bar
Provides easy access to commonly used software functions.
Two tool bars are provided, as follows:
• File
Contains icons for creating, opening, and saving files. For details, see Sections 2.2.1 File—
New, 2.2.2 File—Open, and 2.2.4 File—Save.
• Tools
Contains icons for backing up PBX data to the SD Memory Card, viewing extension
information, and accessing Online Help. For details, see Sections 2.4.1 Tool—SD memory
backup and 2.4.7 Tool—Extension List View.
These menus can be positioned freely. Click and drag the title bar of a menu to move it to another
position. It will automatically snap in to position above, below, to the left, or to the right of the main
window if released there. Otherwise, it will float separately from the main window.
Whether the tool bar is displayed or not can be chosen by selecting Toolbar from the View menu.
3. Tab Bar
The name of each screen currently open is displayed in a tab in this tab bar. When multiple screens
are open at the same time, click on the tab of a screen to display the options associated with that
screen.
4. System Menu
Provides access to the settings used for programming the PBX, grouped into 11 topics.
For details, see Sections 2.7 [1] Configuration to 2.17 [11] Maintenance.
To display the individual screens within a topic, click the topic heading. It will expand to show the sub-
topics.
• If a sub-topic contains more than one screen, clicking the name of the sub-topic will display
the names of individual screens. Clicking an expanded sub-topic will hide the names of
individual screens.
Double-click on a screen name to open that screen in 6. Main Screen below.
This menu can be positioned freely. Click and drag the title bar of the menu to move it to another
position. It will automatically snap in to either the left side or right side of the main window if released
there. Otherwise, it will float separately from the main window.
Whether the system menu is displayed or not can be chosen by selecting System Menu from the
View menu.
5. Status Bar
The status bar displays information on the current state of the Maintenance Console.
Whether the status bar is displayed or not can be chosen by selecting Statusbar from the View
menu.
The information displayed is as follows, in order from left to right:
Area
Program Mode
PBX Type
Values
Initial Mode
Batch Mode xxx
Interactive Mode
Type: TDA30/TDA100/
TDA200/TDA600
Description
See 2.1.1 Starting Maintenance
Console and Software Modes above.
"xxx" is replaced by the name of the
current system data file.
Displays the type of PBX being
programmed.
PC Programming Manual
2.1 Introduction
33