Panasonic KX-TDA100 Programming Manual page 773

Intercept—Routing to Operator - No Destination (Destination is not
programmed)
Enables the Intercept Routing—No Destination feature to activate when there is no destination for the
call. (The Intercept Routing—No Destination feature always works for calls through an LCOT/ELCOT
or T1 [LCOT/GCOT] card, even when this feature is disabled.)
Value Range
Disable (Reorder Tone): Sends a reorder tone to the caller
Enable: Redirects the call to an operator
Maintenance Console Location
2.16.7 [10-5] Miscellaneous
Programming Manual References
None
Feature Guide References
1.1.1.7 Intercept Routing—No Destination
Intercept—Intercept Routing for Extension Call (MPR Software File Version
3.1000 or later)
Enables the Intercept Routing feature to operate for extension calls.
Value Range
Disable, Enable
Maintenance Console Location
2.16.7 [10-5] Miscellaneous
Programming Manual References
None
Feature Guide References
1.1.1.7 Intercept Routing—No Destination
2.16 [10] CO & Incoming Call
PC Programming Manual 773